Product Description The power cable allows the Sigma FP camera to get the power from D-tap / P-tap battery source. With the safety design step-down voltage from 14.8V(D-tap) to 7.2V(dummy battery). Specification:Model: Dtap-DC12Cable length: 31.5" / 80 cmPower input: 14.8VPower output: 7.2V-8.4VIncluded:1x Dtap to...

Product Description Hight light:RS2 RS3 Pro to RED Komodo Run/Stop Recording Cable will allow full control of start/stop recording with the RS2 gimbal. Quick and easy start/stop recording control the RED Komodo camera when filming via RS2 / RS3 / RS3 Pro / RS4...

Product Description This cable allows you to power the Sigma FP camera via a DC 7.2V to 8.4V source via the dummy battery power. Specification:Model: DC-DC12Cable length: 15.7" / 40cmPower input: DC 7.2-8.4VPower output: DC 7.2-8.4V What's in the box:1x DC(5.5/2.1male connector) -DC12

A battery power cable replacement for the Panasonic DMW-BLJ31 battery. With D-tap/P-tap that can get power from the D-tap power source. Specification:Model: Dtap-S1Length: 47" / 120cmPower input: 9-18VPower output: 7.2V / 3A What's in the box: 1x Dtap power cable1x DMW-BLJ31 dummy battery

Product Description NP-F / L-Series to D-Tap / P-Tap power kit allows you to draw power by connecting your D-Tap/P-Tap output from the D-tap battery directly to your monitor. Fit for Atomos, Feelworld, Neewer NW759, and the monitor can be power by NP-F /...

Product Description Highlights:- Update the RS2 to the newest firmware version- Power the BMPCC 4K camera from DJI RS2 gimbal The LP-E6 power cable connect with the DJI RS2 gimbal via a type C power output socket to power the Blackmagic BMPCC4K cameras. Specification:Model:...

Product Description Highlights:- BMW-BLK22 Dummy battery power cable- Safety Dtap socket design(LED indicator)- Step down voltage from 18V to 6-8.4V- 45cm/17inch- Design for Panasonic s5 cameraIncludes:1x Dtap to DMW-BLK22 Power Cable

Product Description The power cable connects the BMPCC 4K/6K with DJI Ronin-S. Using Ronin-S 12V accessory power port to supply power to BMPCC 4K/6K camera. Specification:Model: RS-BMPCC4KPower output: 10.8VPower input: 12VCable length: 30cm What's in the box:1 x RS-BMPCC4K power cable

Product Description The power cable allows the Panasonic G5/G6/G85, Sigma FP camera gets the power from the DJI Ronin S2 gimbal USB C power output port. Specification:Model: RS2-DC12Cable length: 11.8" / 30 cmPower input: 6-8.4VPower output: 8.4V /2A What's in the box:1x USB C to...

Product Description Highlights: - Update the RS2 to the newest firmware version- Power the Z cam, NP-F / L-series type on-camera monitor from DJI RS2 gimbal. The LP-E6 power cable connect with the DJI RS2 gimbal via a type C power output socket to...

A 23" length Dtap/Ptap with a 7-pin power cable for powering the Tilta Nucleus-M motor with a Dtap power source. Specification:Model: Dtap-NuMCable length: 23inch(60cm)Connector: D-tap & 7-Pin What's in the box: 1 x Dtap with7-pin power cable

Highlights:- Compatibility: Ronin-S 3-axis stabilization- Output power: Steps down 12V to 7.4V, 1A- Fit for: Canon 5D4 / 5D3 / 480D Cameras The LP-E6 dummy battery allows the Canon 5D4 / 5D3 / 480D Cameras Camera to get the power from the DJI Ronin-S 12V...

Product Description This cable is designed for Tilta Nucleus Nano motor. Works with V-Mount and Gold Mount. Specification:Model: Dtap-NuNCable length: 23inch(60cm) What's in the box:1 x Dtap with micro USB power cable

Product Description To feed timecode signal from a Tentacle Sync or Deity TC-1 to cameras and devicesSpecification:Plug A: NEUTRIK 3.5mm TRS JackPlug B: Right Angle BNCCable Length: 50cm / 19.6inch Compatible Cameras:Including, but not limited to:Canon C70/C300 MK II/ C300 MK III/ C500, Sony...

Product Description Power cable for replacing the BP-DC12 Sigma FP camera battery. Allows you to power your FP camera from the Ronin-S gimbal. Specification:Model: BLC12-RoninSCable length: 11.8" / 30cmPower input: 12VPower output: 7.2-8.4V Included:1x DW-BLC12 to RoninS power cable

Product Description D-Tap to Blackmagic Pocket Cinema Camera 4K/6K power cable allows you to power the BMPCC4K/6K using any V-Mount or Gold Mount battery with a D-Tap plug. Specification:Cable length: 30cm(12inch)Weight: 50g(0.66 lbs)

Product Description LP-E6 to D-Tap / P-tap power kit allows you to draw power by connecting your D-Tap/P-Tap output from a Pro Battery directly to your SmallHD monitor. Specifications:Anti short-circuit designLED display voltageSuitable for SmallHD 500, 700 SeriesDC 7.2V output27.5inch(70cm) max length What's in...

Product Description - High-quality and flexible cable- Safety Dtap socket protects your gear- Cable length: 55cm / 21.6inch- Design for RED Komodo camera What's in the box: 1 x D-Tap to RED Komodo power cable

Highlights:- Compatibility: Ronin-S 3-axis stabilization- Output power: Steps down 12V to 7.4V, 1A- Fit for: Fujifilm T-X3 Camera The NP-W126 dummy battery allows the Fujifilm T-X3 Camera to get the power from the DJI Ronin-S 12V accessory port. Power steps down from 12V to 7.2V...

Product Description Highlights:- Safety Dtap socket design- 11-20V DC output- Cable length 50cm/19.6inch- Design for Canon C70 power supplyWhat's in the box:Dtap to C70 power cable x1